E. Aydın, E. Kalaycı (2016), Implementing consecutive project-based learning in an antenna and propagation course, International Journal of Electrical Engineering Education, Vol. 53, No. 1

Ziya Karakaya, Besim Baranoğlu, Barbaros Çetin, Ali Yazıcı (2015), A Parallel Boundary Element Formulation for Tracking Multiple Particle Trajectories in Stoke's Flow for Microfluidic Applications, CMES – Computer Modeling in Engineering & Sciences, 104, 227-24

O. Aslan (2015), Numerical modeling of hydrogen diffusion in metals accounting for large deformations, International Journal of Hydrogen Energy

E. Oktay, H.U. Akay, O.T. Sehitoglu (2014), Three-dimensional Structural Topology Optimization of Aerial Vehicles Under Aerodynamic Loads, Computers and Fluids, 92, pp. 225-232

K.Y. Kapusuz, S. Can, E. Aydın (2014), Calculation of resonant frequencies of a shorting pin-loaded ETMA with ANN, Microwave and Optical Technology Letters, 56 (3), 660–663

K.Y. Kapusuz, S. Can, E. Aydın (2013), Neural network based resonant frequency solver for rectangular shaped shorting pin-loaded antennas, Microwave and Optical Technology Letters, 12 (55), 3025-3028

Mahmut Koyuncu, F. Yeşim İkikat, G. Canan İçöz, Besim Baranoğlu, Ali Yazıcı (2012), Implementation of a Parallel Dual Reciprocity Boundary Element Method for the Solution of Coupled Thermoelasticity and Thermoviscoelasticity Problems, CMES-Computer Modeling in Engineering & Sciences, 84, 13-26

E.U.Aydın (2012), Operating Frequency Calculation of a Shorting Pin-Loaded ETMA, Microwave and Optical Technology Letters, 54, 1432-1435

E.U.Aydın, N. E. Cagiltay (2012), A New RF and Microwave Engineering Course Enriched With Advanced Technologies, Computer Applications in Engineering Education., 20, pp. 634–645

Ö. Aslan, Lallit Anand, Shawn A. Chester (2012), A gradient theory for large deformation isotropic elastoplastic materials, International Journal of Plasticity, 30-31, 116-143

E.U.Aydın, Cagiltay, N.E, Aydın, C. C., Kara, A. (2011), Seven Principles of Instructional Content Design for a Remote Laboratory: A Case Study on ERRL, IEEE Transactions on Education, 54, pp.320-327

Ö. Aslan, N. Cordero, A. Gaubert, S. Forest (2011), The micromorphic approach to crystal plasticity and damage, International Journal of Engineering Science, 49, 1311-1325

E. Oktay, H.U. Akay, O. Merttopcuoğlu (2011), Parallelized Structural Topology Optimization and CFD Coupling for Design of Aircraft Wing Structures, Computers and Fluids, 49, pp. 141-145

C. Cigdemoglu, H.O. Arslan, H.U. Akay, (2011), A Phenomenological Study of Instructor's Experiences on an Open Source Learning Management System, Procedia - Social and Behavioral Sciences, 28, pp. 790-795

Ö. Aslan, S. Quilici, S. Forest (2011), Numerical modeling of fatigue crack growth in single crystals based on microdamage theory, International Journal of Damage Mechanics, 20, 681-705

E.U.Aydın (2010), An RFID Based Indoor Tracking Method for Navigating Visually Impaired People, Turk J Elec Eng & Comp Sci

E.U.Aydın (2010), Modified resonant frequency computation for tunable equilateral triangular microstrip patch., IEICE Electronics Express, Vol.7

J. Liu, H.U. Akay, A. Ecer, R.U. Paylı (2010), Flow Around Moving Bodies Using a Dynamic Unstructured Overset-grid Method, International Journal of Computational Fluid Dynamics, Germany, 24,6, pp. 187-200

Ö. Aslan, Samuel Forest (2009), Crack growth modeling in single crystals based on higher order continua, Computational Materials Science, 45, 756-761

E.U.Aydın (2009), Computation of a Tunable Slot-Loaded Equilateral Triangular Microstrıp Antenna, Journal of Electromagnetic Waves and Applications

E.U.Aydın (2009), Requirements for Remote RF Laboratory Applications: An Educators’ Perspective, IEEE Trans. on Education

E.U.Aydın (2008), A new model for indoor propagation prediction using genetic algorithm, IEICE Electron. Express

E.U.Aydın (2008), Teaching Usage of Equipments in a Remote Laboratory, TOJET

E.U.Aydın (2007), Computation and Optimization of Resonant Frequency and Input Impedance of a Coax-Fed Circular Microstrip Antenna, Microwave and Optical Technology Letters

Besim Baranoğlu, Yalçın Mengi (2006), The use of dual reciprocity boundary element method in coupled thermoviscoelasticity, Comput. Methods Appl. Mech. Eng., 196, pp.379-392

J. Koh, A.T. Hsu, H.U. Akay, M.F. Liou (2005), Analysis of Overall Heat Balance in Self-Heated Proton-Exchange-Membrane Fuel Cells for Temperature Predictions, Journal of Power Sources, 144, pp. 122-128

E.U.Aydın (2004), Optimizing the Performance of Single Mode Laser Diode System Using Genetic Algorithm, Optics and Lasers in Engineering

E.U.Aydın (2003), Genetic Algorithm Approach to Estimate Radar Cross Section of Dielectric Objects, IEICE Transactions on Electronics

E. Oktay, H.U. Akay, A. Uzun (2003), A Parallelized 3D Unstructured Euler Solver for Unsteady Aerodynamics, AIAA Journal of Aircraft, 40,2, pp. 348-354

H.U. Akay, Y. Liu, M. Rassaian (2003), Simplification of Finite Element Models for Thermal Fatigue Life Prediction of PBGA Packages, ASME Journal of Electronic Packaging, 125, pp. 347-353

E. Yılmaz, M.S. Kavsaoğlu, H.U. Akay, I.S. Akmandor (2001), Cell-vertex Based Parallel and Adaptive Explicit 3D Flow Solution on Unstructured Grids, International Journal of Computational Fluid Dynamics, 14, pp. 271-286

Y.P. Chien, A. Ecer, H.U. Akay, S. Secer, J.D. Chen (2001), Cost Estimation of Parallel CFD Using Variable Time-Stepping Algorithms, International Journal of Computational Fluid Dynamics, 15, pp. 183-195

S. Kocak, H.U. Akay (2001), Parallel Schur Complement Method for Large-Scale Systems on Distributed Memory Computers, Journal of Applied Mathematical Modeling, 19, pp. 873-886

E.U.Aydın (2001), An Extrapolation Technique for Predicting the RCS Characteristics of Large Objects Using Genetic Algorithm and Prony’s Method, Microwave and Optical Technology Letter

A. Ecer, N. Gopalaswamy, H.U. Akay, Y.P. Chien (2000), Digital Filtering Techniques for Parallel Computation of Explicit Schemes, International Journal of Computational Fluid Dynamics, 13, pp. 211-222

Y.P. Chien, A. Ecer, H.U. Akay, S. Secer, R. Blech (2000), Communication Cost Estimation for Parallel CFD Using Variable Time-Stepping Algorithms, Computer Methods in Applied Mechanics and Engineering, 19, pp. 1379-1389

H.U. Akay, A. Ecer, K. Fekete (1998), A Semi-Explicit Parallel Flow Solver for Viscous Incompressible Flows, Computer Methods in Applied Mechanics and Engineering, 151, pp. 1-12

N. Gopalaswamy, A. Ecer, H.U. Akay, Y.P. Chien (1998), Efficient Parallel Communication Schemes for Explicit CFD Solvers, AIAA Journal, pp. 961-967

N. Gopalaswamy, H.U. Akay, A. Ecer, and Y.P. Chien (1997), Parallelization and Dynamic Load Balancing of NPARC Codes, AIAA Journal, 35, pp. 1806-1812

W.J. Mascarenhas, H.U. Akay, and M.J. Pikal, (1997), A Computational Model for Finite Element Analysis of the Freeze-Drying Process, Computer Methods in Applied Mechanics and Engineering, 148, pp. 105-124

###

E.U.Aydın, Cagiltay N.E, Tokdemir G., Kara A. (2012), A Remote laboratory development as an action research: A case study, Scientific Research and Essays, 7, pp. 2337-2342

E.U.Aydın, Kara,A.,Özbek, M.E., Cagiltay, N. (2011), Maintenance, sustainability and extendibility in virtual and remote laboratories, Procedia - Social and Behavioral Sciences, 28, pp.722-728

H.U. Akay, N. Nayan, W.V. Bell, G.L. Troyer, R.E. Dukes, P. Mohan (2007), CFD Modeling of Pharmaceutical Isolators with Experimental Verification of Airflow, PDA Journal of Pharmaceutical Science and Technology, pp. 237-254

E.U.Aydın (2007), Remote RF Laboratory Requirements: Engineers’ and Technicians’ Perspective, Turkish Online Journal of Distance Education-TOJDE

H.U. Akay, R.M. Pidaparti, P.W. Longest, A.T. Hsu (2005), Nanoscale Computational Analysis for an Idealized Bio-Molecular Motor, Bulletin of the Polish Academy of Sciences, Technical Sciences, 53,4, pp. 26-44

M. Pikal, S. Chen, H.U. Akay (2005), Glass Transition Models in Freeze Drying, Pharmaceutical Development and Technology, 10, pp. 17-32

H.U. Akay, N.H. Paydar, G. Glogas, H. Zhang (1998), Viscoelastic Study of a Conductive Adhesive for Electronic Packages - Part 1: Experimental Determination of Material Properties, International Journal of Microelectronic Packaging, 1, 217-224

H.U. Akay, N.H. Paydar, G. Glogas, H. Zhang (1998), Viscoelastic Study of a Conductive Adhesive for Electronic Packages - Part 2: Thermal Stress Analysis Using the Finite Element Method, İnternational Journal of Microelectronic Packaging, 1, 225-233

H.U. Akay, E. Oktay, M. Manguoglu, A.A. Sivas (2015), Improved Parallel Preconditioners for Multiphysics Topology Optimizations, 27th International Conference on Parallel Computational Fluid Dynamics, Montreal, Canada, 174-176

T. Acar, F. Çalışkan, E. Aydın (2015), Comparison of Computer-Based Propagation Models with Experimental Data Collected in an Urban area at 1800 MHz, 16th IEEE MTT-S WAMICON, Orlando

Tomaz Pepelnjak, Besim Baranoğlu, Erdem Kayhan, Bilgin Kaftanoğlu (2015), Numerical Simulation of the Deep Drawing Process with Local Heating at the Flange Region, 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Kuşadası-Aydın, Türkiye

Mehmet S. Solmaz, Barbaros Çetin, Besim Baranoğlu, Murat Serhatlıoğlu, Necmi Bıyıklı (2015), Boundary Element Method for optical force calibration in microfluidic dual-beam optical trap, SPIE--Optical Trapping and Optical Micromanipulation XII, San Diego, CA, USA

Aydın E. (2014), An algorithm for passive RFID based location estimation, IEEE 22th Signal Processing and Communications Applications Conference, Trabzon

S. Forest, D. Colas, S. Flouriot, O. Aslan (2014), Fatigue Crack Initiation and Propagation in Metal Single and Poly, 11th World Congress on Computational Mechanics, WCCM XI, Barcelona

M. Emin Tamer, Omer Music, Besim Baranoğlu, İzzet Özdemir, Ali Sakin, İsmail Durgun (2014), Numerical and Experimental Investigation of Incremental Sheet Forming, 2nd International Conference on Metal Forming (METFORM-2014), Ankara, Türkiye

O. Aslan (2014), Numerical modeling of Hydrogen diffusion in metals accounting for large deformations, 4TH INTERNATIONAL CONFERENCE ON NUCLEAR AND RENEWABLE ENERGY RESOURCES, NURER 2014, Antalya

Besim Baranoğlu, Barbaros Çetin (2014), A particle flow specific boundary element formulation for microfluidic applications, 4th Micro and Nano Flows Conference, Londra, İngiltere

M. Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2014), Finite element analysis of incremental sheet metal forming with successive tool paths for use in prototype manufacturing of car body components, World Congress on Computational Methods XI, Barcelona, İspanya

Nezih Eren Mumcu, Besim Baranoğlu, Feridun Özhan (2014), Finite Element Simulation of the Hot Forging Operation in Manufacturing of Bearing Rings with Special Emphasis on Manufacturing Speed, World Congress on Computational Methods XI, Barcelona, İspanya

Besim Baranoğlu, Barbaros Çetin (2014), Parallel implementation of 2-D boundary element formulation for a microfluidic particulate flow, World Congress on Computational Methods XI, Barcelona, İspanya

G.Kaynaköz, N. Koray Kılıç, K.Y. Kapusuz, S. Can, E. Aydın (2013), Reader Antenna Design for RFID Applications, IEEE 21th Signal Processing and Communications Applications Conference, Girne

O. Aslan, D. Zhang (2013), Material Point Method for Finite Strain Plasticity and Cavitation problems, 23rd International Workshop on Computaional Mechanics of Materials, IWCMM23, Singapore

Ö. Aslan, D. Zhang (2013), Material Point Method for Large Deformation Plasticity and Failure, 12th U.S. National Congress on Computational Mechanics, USNCCM12 , Raleigh, North Carolina

M. Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2013), Simulation for Incremental Sheet Forming Process: a Comparison of Implicit and Explicit Finite Element Analysis with Experimental Data, 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Türkiye

Besim Baranoğlu, Elif Aydın, Şeyma Tütüncü, K. Yiğit Kocaman (2013), Electromagnetic Bulging: A Sheet Metal Forming Process Using Electromagnetic Field, 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Türkiye

B. Dağdeviren, K.Y. Kapusuz, S. Can, E. Aydın (2013), Çift Frekanslı, H-Şekilli Anten Tasarımı Ve Üretimi, IEEE 21th Signal Processing and Communications Applications Conference, Girne

B. Dağdeviren, K.Y. Kapusuz, S. Can, E. Aydın (2013), Düzlemdeş Dalga Kılavuzu Beslemeli Yama Antenlerde Çalışma Frekansı ve Bant Genişliğini Etkileyen Parametrelerin Analizi, 21th Signal Processing and Communications Applications Conference, Girne

B. Baranoglu, E. Aydın, S. Tutuncu, K. Y. Kocaman (2013), Electromagnetic Bulging: A Sheet Metal Forming Process Using Electromagnetic Field, Diemolds, Antalya

Besim Baranoğlu (2013), Solution of coupled linear thermoviscoelasticity problems with dual reciprocity boundary element method (DRBEM): A comparison of direct and iterative solutions, SEECCM13 III South-East European Conference on computational mechanics, Kos, Yunanistan

Elif Aydın, Besim Baranoğlu (2013), Encouraging engineering students in collaborative research projects, 2nd International Engineering Education Conference, Antalya, Türkiye

E.U.Aydın (2012), Dual frequency two shorting pin loaded equilateral triangular patch antennas, 32th Progress in Electromagnetics Research Symposium (PIERS), Moscow,Russia

E.U.Aydın (2012), Analysis of a Dual Frequency Circular Patch Antenna, 32th Progress in Electromagnetics Research Symposium (PIERS), Moscow,Russia

E.U.Aydın (2012), Design & analyzes of dual-frequency circular microstrip patch antenna with a shorting pin, 12th Mediteranean Microwave Symposium, Istanbul,Turkey

E.U.Aydın (2012), Dual-Frequency, Single Shorting Pin Loaded Equilateral Triangular Patch Antennas, 12th Mediteranean Microwave Symposium, Istanbul,Turkey

E.U.Aydın, S. Can (2012), Enhancement of Student Learning in Antennas and Propagation Area via Real-Life Projects, 2nd International Engineering Education Conference (IEEC)

E.U.Aydın, Can, S (2012), Woman Students Situation in Engineering Faculties in Turkey, 2nd International Engineering Education Conference (IEEC)

E.U.Aydın, Can, S, E. Kalaycı (2012), A Study on Antennas and Propagation Course Project Collaborated with Department of Management, 2nd International Engineering Education Conference (IEEC)

E.U.Aydın, Kapusuz, K.Y., Can, S., (2012), Rectangular Shaped, Dual-Frequency Antenna with a Single Shorting Pin with a Single Shorting Pin, 9th International Conference on Electronics, Computer and Computation (ICECCO)

E.U.Aydın, B. Baranoğlu (2012), Encouraging Engineering Students in Collaborative Research Projects, 2nd International Engineering Education Conference (IEEC)

E.U.Aydın, Ş. Tütüncü, K. Y. Kocaman, T. Yılmaz, O. Coşkun, G. İnanan, S.Annak, B. Baranoğlu (2012), Electromagnetic Sheet Metal Forming Process Using Electromagnetic Field, 2nd International Engineering Education Conference (IEEC)

E.U.Aydın, Ozyurt, E., Yapıcı, A. C. (2012), Indoor Location Finding Algorithms for Mobile Robots Carrying Passive RFID Tags, 6th European Conference on Antennas and Propagation (EUCAP)

Erdal Oktay, H.U. Akay (2012), Structural Topology Optimization Under Aerodynamic Loads Using PETSc as a Parallel Solver, Int. Conf. on Parallel Computational Fluid Dynamics, Atlanta, Georgia, 12

Ceyhan Çiğdemoğlu, H.U. Akay (2012), Changes in the Experiences of Instructors on the Use of a Learning Management System, Proceedings of the 2nd International Engineering Education Conference, Antalya, Turkey, pp. 149-154

H.U. Akay, Abdulkadir Erden (2012), A Team-Based Undergraduate Research Projects Program, Proceedings of the 2nd International Conference on Engineering Education, Antalya, Turkey, pp. 357-363

B. Baranoglu, M.E. Tamer, A. Sakin, I. Durgun, O. Music, H.U. Akay (2012), Industry Funded Undergraduate Research Projects as a New Method for Industry-University Cooperation: The Example of Tofas-Atilim University Joint Project on Incremental Forming, Proceedings of the 2nd International Conference on Engineering Education, pp. 327-333

Besim Baranoğlu, M. Emin Tamer, İzzet Özdemir, Omer Music, Ali Sakin, İsmail Durgun, Hasan U. Akay (2012), Industry funded undergraduate research projects as a new method for industry-university cooperation: The example of TOFAS-Atilim University joint project on incremental forming, 2nd International Engineering Education Conference, Antalya, Türkiye

Ö. Aslan (2012), A Large-Deformation Gradient Damage Model for Single Crystals Based on Microdamage theory, 22nd International Workshop on Computaional Mechanics of Materials, IWCMM22, Baltimore, USA

E.U.Aydın, Cagiltay, N., Kara,A., Erdem, C., Özbek, (2011), Virtual and Remote Laboratory Applications, EUROCON

E.U.Aydın, Cagiltay, E., Kara, A., Erdem, C., Ozbek, M.E. (2011), Virtual or Remote Laboratory Why. In Proceedings of World Conference on Educational Multimedia, Hypermedia and Telecommunications

E.U.Aydın, Kara, A., Özbek, M.E., Cagiltay, N., (2011), Maintenance, sustainability and extendibility in virtual and remote laboratories, World Conference on Educational Technology Researches

Celal Onur Alkaş, Ceren Merve Karakaş, Celalettin Karadoğan, Besim Baranoğlu (2011), Design, analysis and improvements of aluminum cold forging process, 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, Türkiye

Besim Baranoğlu, Mahmut Koyuncu, F. Yeşim İkikat, G. Canan İçöz, Ali Yazıcı (2011), Implementation of a parallel dual reciprocity boundary element method for the solution of coupled thermoelasticity and thermoviscoelasticity problems, ICCESMM, Zonguldak, Turkiye

Ö. Aslan, Lallıt Anand (2011), A gradient theory for large-deformation isotropic elastic-plastic materials, 2nd International Conference on Material Modeling, ICMM2, Paris, France,

Ö. Aslan, Lallit Anand (2011), A fully coupled thermo-mechanical model for hydrogen diffusion in metals accounting for large elastoviscoplastic deformations, 11th US National Congress on Computational Mechanics, USNCCM11, Minneapolis, Minnesota, USA,

H.U. Akay (2010), The Need for Simulation-¬Based Engineering and Science Emphasis in Engineering Education, Proceedings of the International Engineering Education Conference, Antalya, Turkey, pp. 4-5

H.U. Akay, E. Oktay, O. Merttopcuoğlu, C. Şener (2010), Parallelized Structural Topology Optimization and CFD Coupling for Design of Aircraft Structures, Int. Conf. on Parallel Computational Fluid Dynamics, Kaohsiung, Taiwan, pp. 32-35

E.U.Aydın (2010), A web Based Training Module for Teaching Digital Communications: Content Design, Int. Engineering Education Conference

E.U.Aydın (2010), Instructional Approaches in a RF and Microwave Engineering Course, Int. Engineering Education Conference

E.U.Aydın (2010), Design and Development of a Remote and Virtual Environment for Experimental Training in Electrical and Electronics Engineering, IEEE 9th Int. Conf. On Information Technology Based Higher Education and Training (ITHET 2010)

E.U.Aydın (2010), Use of Advanced Technologies in a RF and Microwave Engineering Course, IEEE Engineering Education

E.U.Aydın (2010), Principles for the Design of a Remote Laboratory: A Case Study on ERRL, IEEE Engineering Education 2010

Besim Baranoğlu, İsmail Bircan (2010), The example of Metal Forming Center of Excellence / Üniversite-Sanayi iĢbirliğinde yeni yaklaĢımlar: Atılım Üniversitesi Metal ġekillendirme Mükemmeliyet Merkezi Örneği, International Engineering Education Conference, Antalya, Türkiye

Ö. Aslan, Samuel Forest (2010), Microdamage approach to crystal plasticity with application to fatigue crack growth, ", EUROMECH colloquium 505 "Multiscale effects in fatigue of metals", Palaiseau, France

H.U. Akay, R. Paylı, J. Liu, A. Ecer (2009), An Overset Unstructured Grid Method for Parallel Solvers, Int. Conf. on Parallel Computational Fluid Dynamics Conference, Moffett Field, CA, 81-88

Besim Baranoğlu, Erkan Önder, Celal Soyarslan, Mahmut Şenaltun, A. Erman Tekkaya (2009), Springback Estimation of an Automobile Part: Comparison of Numerical Simulations with Experimental Results, 5th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Kuşadası-Aydın, Türkiye

Ö. Aslan, Samuel Forest (2009), Generalized continuum modeling of crack propagation in single crystals under fatigue, 1st International Conference on Material Modeling, ICMM1, Dortmund, Germany

Ö. Aslan, Samuel Forest (2009), Numerical Modeling of Fatigue Crack Growth in Single Crystals Based on Microdamage Theory, 10th International Conference on Computational Plasticity Fundamentals and Applications, COMPLAS-X, Barcelona, Spain

Ö. Aslan, Samuel Forest (2009), Crack Growth Modeling in Single Crystals based on Microdamage Continuum, 12th International Conference on Fracture, ICF-12, Ottawa, Canada

E.U.Aydın (2008), An RFID Based Location Finding and Tracking with Guidance, WICOM, pp.1-4

E.U.Aydın (2008), An Indoor Navigation Aid Designed for Visually Impaired People, IECON, pp.2982-2987

E.U.Aydın (2008), Distance laboratory applications ERRL: A study on radio communication in electronic field, OPTIM, pp.157-162

K.J. Wilson, H.U. Akay (2008), IUPUI Multidisciplinary Undergradute Research Institute, The 12th Council of Undergraduate Research National Conference, St. Joseph, Minnesota, pp. 9-10

Ö. Aslan, Samuel Forest (2008), Fatigue crack growth modeling in single crystals based on higher-order continua, 6th International Conference on Low Cycle Fatigue, LCF-6, Berlin, Germany

Ö. Aslan, Samuel Forest (2008), Crack growth modeling in single crystals based on higher-order continua, 18th International Symposium on Computational Mechanics of Materials, IWCMM-18

E.U.Aydın (2007), Study of an RFID Based Moving Object Tracking System, RFIDEurasia, pp.1-5

E.U.Aydın (2007), A Remote Laboratory For Training in Radio Communications: ERRL, PIMRC, pp.1-5

E.U.Aydın (2007), Pilot Remote Experiment in The ERRL:Measurement of Scattering Parameters, PIMRC, pp.1-4

E.U.Aydın (2007), How to Teach Usage of Equipments in a Remote Laboratory, PIMRC, pp.1-6

J. Chen, H.U. Akay (2007), Capstone Design Course: A Bridge to the Real World Engineering, National Capstone Design Course Conference, Boulder, Colorado, pp. 25-30

G.M. Malacinski, H. Yokota, H.U. Akay (2007), Integrating the Traditionally Trained Mechanical Engineer (Problem-Solver) into Modern Medical Research Projects, Proceedings of the Spring 2007 American Society for Engineering Education, Inidanapolis, Indiana, pp. 55-61

Besim Baranoğlu (2007), "Exact and non-singular integration in the BEM using 2-D discontinuous quadratic elements for Laplace Equation, CMM2007 17th International Conference on Computer Methods in Mechanics, Lodz-Spala, Polonya

Ö. Aslan, Samuel Forest (2007), Regularization of crack growth modeling based on micromorphic continua, International Union of Theoretical and Applied Mechanics Symposium, IUTAM, , Netherlands,

Besim Baranoğlu, Yalçın Mengi (2006), On the Use of Iterative Dual Reciprocity Boundary Element Method on Coupled Thermoviscoelasticity, 35th Solid Mechanics Conferance, Krakow, Polonya

R.M. Pidaparti, H.U. Akay (2004), ME Curriculum Redesign Through an Assessment Process, Proceedings of the 2004 American Society for Engineering Education Annual Conference & Exposition, pp. 123-129

A.A. Sivas, E. Oktay, H.U. Akay, M. Manguoglu (2015), Paralel Topoloji Çözümleri için Etkin Bir Önkoşullandırma, 4. Ulusal Yüksek Başarımlı Hesaplama Konferansı, ODTÜ, Ankara

M. Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2013), Artımlı şekillendirme tekniği ile prototip sac parça üretimi, Makina İmalat Teknolojileri Kongresi, Bursa, Türkiye

M. Emin Tamer, Omer Music, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2013), Artımlı sac şekillendirme yönteminin sayısal analizinde açık adım ve kapalı adım sonlu eleman yöntemi çözümlerinin karşılaştırmalı analizi, TUMTMK XIII. Ulusal Mekanik Kongresi, Manisa, Türkiye

Barbaros Çetin, Besim Baranoğlu (2013), Mikrokanal içinde parçacık hareketinin sınır eleman yöntemi ile analizi, TUMTMK XIII. Ulusal Mekanik Kongresi, Manisa, Türkiye

Omer Music, M. Emin Tamer, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2012), Prototip parça imalatında artımlı sac şekillendirme yönteminin kullanımına yönelik sonlu elemanlar yöntemi tabanlı sistemin doğrulanması, 6. Otomotiv Teknolojileri Kongresi, Bursa, Turkiye

Omer Music, M. Emin Tamer, İzzet Özdemir, Besim Baranoğlu, Ali Sakin, İsmail Durgun (2012), Prototip parça imalatında artımlı sac şekillendirme işlemlerinin kullanımı: simülasyon, imalat ve karşılaştırma, 12. Üretim Araştırmaları Sempozyumu, İzmir, Turkiye

Emre Coruk, Celalettin Karadoğan, Besim Baranoğlu (2011), Sünek malzemelere ait akma eğrisinin çekme testindeki lokal boyun verme öncesi değerlere kadar dolaysız elde edilmesi, XVII. Ulusal Mekanik Kongresi, Elazığ, Turkiye

Besim Baranoglu, Moutaz Elgammi (2011), Elastoplastik problemlerin çözümünde sınır eleman – sonlu eleman yöntemlerinin girişimli kullanımı, XVII. Ulusal Mekanik Kongresi, Elazığ, Turkiye

E.U.Aydın (2008), Uzaktan Laboratuvar Uygulamaları ERRL: Elektronik Alanında Radyo Haberleşmesi Üzerine Bir Çalışma, e-Learning, Turkish Informatics Foundation Distance Learning Platform (UzEP)

E.U.Aydın (2008), What Do Remote Laboratory Applications Promise for Engineering Students: A Case Study of ERRL Project, Bilişim Teknolojileri Işığında Eğitim Konferansı bildiri kitapçığı , pp.41-45

E.U.Aydın (2007), Avrupa Uzaktan Radyo Laboratuvarı: ERRL, Akademik Bilişim Konferansı

Besim Baranoğlu, Yalçın Mengi (2007), Termoelastisite ve termoviskoelastisite analizinde ikili karĢıtlık sınır eleman yönteminin kullanımı, TUMTMK XV. Ulusal Mekanik Kongresi, Isparta, Türkiye

E.U.Aydın (2006), Pek Geniş Bant Anten Tasarımı ve İmalatı, URSI, pp.401-403

E.U.Aydın (2006), Aktif RFID Sistemi Kullanarak İç Mekanda Yönlendirme, URSI, pp.468-470

E.U.Aydın (2004), Elektrik Devre Analizi Dersinde Bilgisayar Destekli Labaratuar Uygulamaları, T.B.D. 21. Ulusal Bilişim Kurultayı, pp.150-157

Yalçın Mengi, A. Hakan Argeşo, Besim Baranoğlu (1999), Sınır Eleman Yöntemine Genel Bakış ve Bazı Uygulamalar, XI. Ulusal Mekanik Kongresi, Bolu, Türkiye

E.U.Aydın (1997), Difraksiyonun Geometrik Teorisi ile Reflektör Anten Analizi, Elektrik-Elektronik Bilgisayar Mühendisliği 7. Ulusal Kongresi, pp.308-311

E.U.Aydın (1997), Düzgün Olmayan örnekleme Tekniklerinin Demet Yayılım Metoduna (BPM) Uygulanması, Elektrik-Elektronik Bilgisayar Mühendisliği 7. Ulusal Kongresi, pp.312-314

E.U.Aydın (1995), Geometrik Optik Metoduyla Alanlar Hesabı, Elektrik-Elektronik Bilgisayar Mühendisliği 6. Ulusal Kongresi, pp.680-683

Besim Baranoğlu, Omer Music, M. Emin Tamer, Ali Sakin, İsmail Durgun (2013), Prototip parça imalatı için sonlu elemanlar yöntemine dayalı bir sistem, Endüstri Otomasyon

Elif Aydın, Besim Baranoğlu (2012), Elektromanyetik Şekillendirme, Cumhuriyet Bilim ve Teknoloji Dergisi

Besim Baranoğlu, İsmail Bircan (2012), Metal Şekillendirme Mükemmeliyet Merkezi Altyapı Oluşturma Projesi, İz Dergisi (Atılım Üniversitesi)

Barbaros Çetin, Besim Baranoğlu (2015), "Boundary elements in Microfluidics" in : Encyclopedia of Microfluidics and Nanofluidics, Springer, pp. 202-213

E. Aydın, M.F. Caglar, A. Kara (2013), Antenna Theory: Analysis and Design (çeviri), Nobel Publications, 2 bölüm-Bölüm 7 ve Bölüm 14

Ö. Aslan, Samuel Forest (2011), Micromorphic approach versus phase field approach to gradient plasticity and damage with application to cracking in metal single crystals, Lecture Notes in Applied and Computational Mechanics, 55, 135-154

H.U. Akay, E. Yılmaz, R.U. Paylı, A. Ecer (2009), Hybrid Parallelism for CFD Simulations: Combining MPI with OpenMP, Parallel Computational Fluid Dynamics 2007, Springer-Verlag, pp. 401-408

H.U. Akay, R.U. Paylı, E. Yılmaz, A. Ecer (2009), Impact of TeraGrid on Large-Scale Simulations and Visualizations, Parallel CFD Conference 2007, pp. 409-415

E.U.Aydın (2009), Communications, RF and Microwaves Fundamentals. From theory to remote experimentations, Transilvania University Publishing House

H.U. Akay, E. Oktay, I. Mertttopcuoğlu, C. Şener, A. Ketenci (2008), Parallel Shape Optimization of a Missile on a Grid Infrastructure, Int. Conf. on Parallel Computational Fluid Dynamics Conference 2008, Lyon, France, 42-45

H.U. Akay, E. Yılmaz, R.U. Paylı, A. Ecer, J. Liu (2008), Scalibility Considerations of a Parallel Flow Solver on Large Scale Computing Systems, Int. Conf. on Parallel Computational Fluid Dynamics, Lyon, France, 62-69

H.U. Akay, S. Chien, G. Makinabakan, A. Ecer (2008), Dynamic Load Balancing on Windows Based Multi-core PCs, Int. Conf. on Parallel Computational Fluid Dynamics, Lyon, France, 83-90